Design and Assembly of A Smart Recycling Bin

M. Makhseed; F. Abdel Salam; S. El-Aswad; S. E. Esmaeili

doi:10.1109/HORA52670.2021.9461315

Design and Assembly of A Smart Recycling Bin

M. Makhseed
, F. Abdel Salam
, S. El-Aswad
, S. E. Esmaeili

Electrical and Computer Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Abstract

Concentration of air pollutants exceeds levels associated with increased risk of health programs. In order to obtain a healthier quality of life with minimized health risks, a reduction of pollution is needed. A major factor of air pollution in urban cities is the burning of waste. Therefore, a reduction in pollution levels can be achieved by reducing waste. This paper discusses the design and implementation of a smart recycling bin (Enviro-Bin). The smart recycling bin filters the waste according to the following material types: metal, glass, and paper. Filtering waste according to material type will consequently lead to decreasing the amount of harmful gases produced from burning the waste and encourage recycling. The proposed prototype is an automated waste material filtering system that contains infrared sensors and two proximity sensors, an inductive sensor and a capacitive one, to determine the presence and type of material. Moreover, each compartment includes an IR sensor to detect the level of the waste in the container.

Original language	English
Title of host publication	HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665440585
DOIs	https://doi.org/10.1109/HORA52670.2021.9461315
State	Published - 11 Jun 2021
Event	3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2021 - Ankara, Turkey Duration: 11 Jun 2021 → 13 Jun 2021

Publication series

Name	HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings

Conference

Conference	3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2021
Country/Territory	Turkey
City	Ankara
Period	11/06/21 → 13/06/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being
SDG 11 Sustainable Cities and Communities

Keywords

conveyor belt
LED
Recycling bin
sensors
stepper-motor
waste

Access to Document

10.1109/HORA52670.2021.9461315

Cite this

Makhseed, M., Salam, F. A., El-Aswad, S., & Esmaeili, S. E. (2021). Design and Assembly of A Smart Recycling Bin. In HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings (HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/HORA52670.2021.9461315

Makhseed, M. ; Salam, F. Abdel ; El-Aswad, S. et al. / Design and Assembly of A Smart Recycling Bin. HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2021. (HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings).

@inproceedings{07f97eb4748d4164816049532de61c06,

title = "Design and Assembly of A Smart Recycling Bin",

abstract = "Concentration of air pollutants exceeds levels associated with increased risk of health programs. In order to obtain a healthier quality of life with minimized health risks, a reduction of pollution is needed. A major factor of air pollution in urban cities is the burning of waste. Therefore, a reduction in pollution levels can be achieved by reducing waste. This paper discusses the design and implementation of a smart recycling bin (Enviro-Bin). The smart recycling bin filters the waste according to the following material types: metal, glass, and paper. Filtering waste according to material type will consequently lead to decreasing the amount of harmful gases produced from burning the waste and encourage recycling. The proposed prototype is an automated waste material filtering system that contains infrared sensors and two proximity sensors, an inductive sensor and a capacitive one, to determine the presence and type of material. Moreover, each compartment includes an IR sensor to detect the level of the waste in the container.",

keywords = "conveyor belt, LED, Recycling bin, sensors, stepper-motor, waste",

author = "M. Makhseed and Salam, \{F. Abdel\} and S. El-Aswad and Esmaeili, \{S. E.\}",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2021 ; Conference date: 11-06-2021 Through 13-06-2021",

year = "2021",

month = jun,

day = "11",

doi = "10.1109/HORA52670.2021.9461315",

language = "English",

series = "HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings",

address = "United States",

}

Makhseed, M, Salam, FA, El-Aswad, S & Esmaeili, SE 2021, Design and Assembly of A Smart Recycling Bin. in HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings. HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings, Institute of Electrical and Electronics Engineers Inc., 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2021, Ankara, Turkey, 11/06/21. https://doi.org/10.1109/HORA52670.2021.9461315

Design and Assembly of A Smart Recycling Bin. / Makhseed, M.; Salam, F. Abdel; El-Aswad, S. et al.
HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2021. (HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and Assembly of A Smart Recycling Bin

AU - Makhseed, M.

AU - Salam, F. Abdel

AU - El-Aswad, S.

AU - Esmaeili, S. E.

PY - 2021/6/11

Y1 - 2021/6/11

N2 - Concentration of air pollutants exceeds levels associated with increased risk of health programs. In order to obtain a healthier quality of life with minimized health risks, a reduction of pollution is needed. A major factor of air pollution in urban cities is the burning of waste. Therefore, a reduction in pollution levels can be achieved by reducing waste. This paper discusses the design and implementation of a smart recycling bin (Enviro-Bin). The smart recycling bin filters the waste according to the following material types: metal, glass, and paper. Filtering waste according to material type will consequently lead to decreasing the amount of harmful gases produced from burning the waste and encourage recycling. The proposed prototype is an automated waste material filtering system that contains infrared sensors and two proximity sensors, an inductive sensor and a capacitive one, to determine the presence and type of material. Moreover, each compartment includes an IR sensor to detect the level of the waste in the container.

AB - Concentration of air pollutants exceeds levels associated with increased risk of health programs. In order to obtain a healthier quality of life with minimized health risks, a reduction of pollution is needed. A major factor of air pollution in urban cities is the burning of waste. Therefore, a reduction in pollution levels can be achieved by reducing waste. This paper discusses the design and implementation of a smart recycling bin (Enviro-Bin). The smart recycling bin filters the waste according to the following material types: metal, glass, and paper. Filtering waste according to material type will consequently lead to decreasing the amount of harmful gases produced from burning the waste and encourage recycling. The proposed prototype is an automated waste material filtering system that contains infrared sensors and two proximity sensors, an inductive sensor and a capacitive one, to determine the presence and type of material. Moreover, each compartment includes an IR sensor to detect the level of the waste in the container.

KW - conveyor belt

KW - LED

KW - Recycling bin

KW - sensors

KW - stepper-motor

KW - waste

UR - https://www.scopus.com/pages/publications/85114500317

U2 - 10.1109/HORA52670.2021.9461315

DO - 10.1109/HORA52670.2021.9461315

M3 - Conference contribution

T3 - HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings

BT - HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2021

Y2 - 11 June 2021 through 13 June 2021

ER -

Makhseed M, Salam FA, El-Aswad S, Esmaeili SE. Design and Assembly of A Smart Recycling Bin. In HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings. Institute of Electrical and Electronics Engineers Inc. 2021. (HORA 2021 - 3rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings). doi: 10.1109/HORA52670.2021.9461315

Design and Assembly of A Smart Recycling Bin

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this